Baby playing with foam while taking bath with mother

Gas Hot Water Repairs Adelaide

Professional Gas Hot Water Repairs, Servicing and Fault Diagnosis Across Adelaide

Experiencing problems with your gas hot water system? SA Hot Water provides professional gas hot water repairs in Adelaide, helping homeowners and businesses resolve hot water faults and restore reliable hot water.

With over 20 years of experience repairing and servicing gas hot water systems, our team has worked on a wide range of gas storage and instantaneous hot water units. We repair and service major brands, including Rinnai, Bosch, Rheem, Dux, Aquamax, Everdure, Beasley, Pyrox, Vulcan, Braemar and Junkers.

Whether your system has stopped producing hot water, is struggling to maintain a consistent temperature or requires servicing, contact SA Hot Water for assistance.

Need gas hot water repairs in Adelaide? Call (08) 8444 7320 to arrange a service.

Professional Gas Hot Water Repairs Across Adelaide

Gas hot water systems can develop faults over time due to worn components, ignition problems, water flow issues and general wear.

Our experienced technicians can assess problems with gas hot water systems, identify potential faults and recommend suitable repairs.

Common problems include:

  • No hot water not working or insufficient hot water
  • Inconsistent or fluctuating water temperatures
  • Gas hot water systems that fail to ignite
  • Pilot light and burner problems
  • Reduced hot water flow or pressure
  • Unusual noises or signs of system deterioration
  • Leaking components and faulty valves
  • Hot water systems requiring regular servicing

Not every problem requires a complete hot water system replacement. Depending on the condition, age and availability of replacement parts, repairing the existing system may be a practical option.

Our team can assess your system and explain the available repair or replacement options.

Gas Hot Water System Servicing

Regular servicing helps identify worn components, potential faults and operating issues before they develop into more serious problems.

SA Hot Water services both instantaneous gas hot water systems and gas storage hot water units.

Servicing requirements vary depending on the manufacturer, model, age and condition of the system. Our technicians assess the appliance and perform the appropriate servicing procedures.

Servicing Instantaneous Gas Hot Water Systems

Instantaneous and continuous flow gas hot water systems heat water as required rather than storing large quantities of heated water in a tank.

Over time, components can become worn, blocked or affected by corrosion, potentially reducing performance or causing operating problems.

When servicing an applicable gas hot water system, our technicians may use specialised testing equipment to assess its operation, identify faults and determine the repairs or maintenance required.

Instantaneous Gas Hot Water Service Checklist

The following is a detailed example of servicing procedures used for applicable gas hot water systems. The exact work performed depends on the appliance’s design, condition and manufacturer requirements.

  • Remove the water valve and install replacement components where required, including the diaphragm, bearing plate, packing gland, O-ring and filter.
  • Clean corrosion from the valve using a wire brush.
  • Apply L641 grease to the bearing plate and O-ring where specified.
  • Apply suitable grease to connecting pipe threads and the top of the water valve where required.
  • Remove the gas valve from the case where the servicing procedure requires it.
  • Dismantle the poppet valve and lubricate the pin with the specified grease.
  • Apply RP7 to the button assembly where appropriate and free up the buttons.
  • Apply silicone grease to water-section retaining screws where specified.
  • Dismantle the burner and clean burner tubes using a suitable brush.
  • Clean the burner assembly.
  • Remove the heat exchanger from the case where required.
  • Clean the heat exchanger using the method appropriate for the appliance.
  • Clean connecting pipes and remove old seals.
  • Check connecting pipe faces for damage, scoring or uneven surfaces.
  • Dismantle and clean the pilot assembly where fitted.
  • Clean the pilot spud.
  • Clean and inspect the thermocouple where fitted.
  • Clean and inspect the ignition electrode.
  • Clean the front and rear covers and remove accumulated dust and debris.
  • Replace the pilot viewing window where necessary.
  • Attach the SA Hot Water service sticker to the front cover.
  • Free up thumb screws where appropriate.
  • Replace damaged or broken cabinet fasteners where required.
  • Replace connecting pipe seals and apply the specified lubricant.
  • Replace the hot pipe seal where required.
  • Reassemble the components and check for leaks.
  • Commission the appliance and record relevant test readings on the invoice.
  • Confirm that the hot water system is operating correctly.
  • Explain any adjustments made to water flow or temperature settings.

These procedures are carried out only where applicable to the specific appliance and by appropriately qualified technicians.

Servicing Gas Storage Hot Water Systems

Gas storage hot water systems heat and store water in an insulated tank, making heated water available when required.

Regular inspections and servicing can help identify problems affecting the burner, thermostat, valves, water temperature and other system components.

Our technicians inspect relevant components and assess the condition and operation of the system.

Gas Storage Hot Water System Service Checklist

Depending on the type of system and its configuration, servicing may include the following checks:

  • Check electrical circuitry where fitted.
  • Inspect pressure relief valves, including operation and discharge points.
  • Check the pressure limiting valve.
  • Check for trapped air and bleed air where required.
  • Inspect dual check valves and relevant backflow prevention devices where fitted.
  • Check thermostat calibration.
  • Check gas pressure.
  • Inspect the burner flame.
  • Clean the burner where required.
  • Check ventilation.
  • Inspect appliance clearances and installation location.
  • Test water quality and pH levels where relevant.
  • Inspect the flue.
  • Check drain valves.
  • Inspect for water leaks.
  • Check for gas leaks.
  • Assess temperature rise and system operation.
  • Inspect circulating pumps where fitted.
  • Check water pressure.
  • Measure water temperature at the hot water system.
  • Check water temperature delivered to taps.
  • Assess warm water system temperatures where applicable.
  • Inspect chemical treatment systems where fitted.

The checklist provides an overview of potential servicing activities. Not every procedure applies to every gas storage hot water system.

Gas Hot Water Brands We Repair and Service

SA Hot Water has experience repairing and servicing gas hot water systems from a wide range of manufacturers, including:

  • Rinnai
  • Bosch
  • Rheem
  • Dux
  • Aquamax
  • Everdure
  • Beasley
  • Pyrox
  • Vulcan
  • Braemar
  • Junkers

Different brands and models use different components and servicing procedures. Our technicians assess the individual appliance to determine the appropriate repair approach.

For older systems, replacement parts may be limited or unavailable. Where repairs are not practical, we can discuss suitable replacement options.

Repair or Replace Your Gas Hot Water System?

If your gas hot water system is experiencing problems, it is worth having the fault assessed before deciding whether to repair or replace it.

A repair may be suitable when the system is otherwise in reasonable condition and replacement components are available.

Replacement may be worth considering when:

  • The system is approaching the end of its expected service life.
  • Repairs are becoming frequent or expensive.
  • Essential replacement components are unavailable.
  • The existing system no longer meets the property’s hot water requirements.
  • A qualified technician determines that the appliance cannot be safely or economically repaired.

SA Hot Water can help you understand the options based on the condition of your existing system.

For new installations, visit our Gas Hot Water Installation Adelaide page.

Frequently Asked Questions About Gas Hot Water Repairs

Why is my gas hot water system not producing hot water?

There are several possible causes, including ignition faults, gas supply issues, faulty components or problems with the system’s water flow. A qualified technician can inspect the appliance to identify the cause.

Can an old gas hot water system be repaired?

Some older gas hot water systems can be repaired, depending on their condition and whether suitable replacement parts remain available. A technician can assess whether repairing or replacing the system is the better option.

How often should a gas hot water system be serviced?

Servicing requirements depend on the appliance manufacturer, model and operating conditions. Follow the manufacturer’s recommendations and arrange an inspection if you notice changes in performance or signs of a fault.

Do you repair instantaneous and storage gas hot water systems?

Yes. SA Hot Water has experience servicing both instantaneous gas hot water systems and gas storage hot water units.

Do you repair Bosch and Rinnai gas hot water systems?

SA Hot Water has experience working with Bosch, Rinnai and other major gas hot water brands. Contact our team with your appliance’s make, model and the problem you are experiencing.

What should I do if I smell gas near my hot water system?

Avoid using the appliance or operating electrical switches nearby. Move away from the affected area and contact your gas emergency service or gas distributor for advice. Do not attempt to repair a suspected gas leak yourself.

Book Gas Hot Water Repairs in Adelaide

If your gas hot water system is not working correctly, SA Hot Water can help you arrange an assessment and discuss the available repair options.

With over 20 years of experience, our team provides gas hot water repairs and servicing across Adelaide.

Need Gas Hot Water Repairs in Adelaide? Call SA Hot Water on (08) 8444 7320 to enquire about gas hot water repairs or arrange a service or replacement.

You can also use the enquiry form on this page to tell us about your hot water problem.

For other hot water services, visit our Hot Water Repairs page.