Transparent Pricing for Repairs, Replacements & New Installations
Want an honest idea of what hot water work costs in Adelaide – without the fluff?
SA Hot Water Adelaide provides fast same-day repairs, hot water system replacements, and new installations across Adelaide. Below is a clear, Adelaide-specific pricing guide for the most common hot water repairs, replacements and installations – including what affects the final cost and how rebates can reduce upfront prices.
Same-day help • Licensed plumbers & electricians • Upfront quotes
👉 Get a Same-Day Hot Water Quote
Quick Comparison: Solar vs Heat Pump vs Gas vs Electric
| System Type | Upfront Cost (Installed) | Running Cost | Best For |
|---|---|---|---|
| Heat Pump | Higher | Very Low | Big savings without roof panels |
| Solar + Booster | Higher | Lowest | Sunny homes with good roof space |
| Gas (Instant/Continuous Flow) | Medium | Low–Medium | Homes with mains gas |
| Electric Storage | Lower | Higher | Cheapest install / straightforward replacement |
Prices shown are typical Adelaide ranges. Final pricing depends on system size, access and installation requirements.
Adelaide Hot Water Pricing Guide (Typical Ranges)
1) Hot Water Repairs (Most Common Jobs)
Most hot water repairs fall into a predictable range depending on the fault and parts needed. As a general guide, hot water repairs are often quoted in the hundreds (not thousands) unless a major component has failed.
Common repairs include:
-
Thermostat or element replacement
-
Valves, tempering valve, pressure relief valve
-
Leaks on fittings/pipework
-
Pilot/ignition faults (gas)
-
Error codes & electrical faults (heat pumps/instant systems)
Best practice: We diagnose first, then quote the repair before work starts.
2) Hot Water System Installation / Replacement Costs (Installed)
These are typical installed price ranges across Australia (Adelaide is usually in-line, but access and compliance can change totals).
Electric storage (installed): commonly the cheapest to install (best for budget replacements).
Gas systems (installed): typically mid-range.
Solar hot water (installed): typically $3,000–$7,000, and you may also need to allow $1,000+ for a booster on some setups.
Heat pump systems: unit prices typically range from $2,500–$5,500, with installed costs varying based on site access, electrical and plumbing requirements.
Trusted Hot Water Brands We Install
We supply and install high-quality systems designed for Australian conditions, including:
-
Bosch
-
Rheem
-
Rinnai
-
Dux
-
Aquamax
-
Vulcan
-
And more
All systems come with full manufacturer warranties.
Why Choose SA Hot Water Adelaide?
When it comes to hot water pricing and installations, experience matters.
✔ Local Adelaide specialists
✔ Licensed & insured gas fitters
✔ Over 40 years of experience
✔ Same-day installation available
✔ Fully compliant & certified work
✔ Clean, professional workmanship
✔ Honest advice – no upselling
✔ Workmanship guarantee
We focus on safe installations and long-term reliability.
Heat Pump vs Solar: Which One Is Better in Adelaide?
If you’ve been comparing “solar vs heat pump”: here’s the straight answer.
-
Heat pumps are usually the best choice when you don’t want roof panels, have limited roof space, or want a high-efficiency upgrade with strong rebates.
-
Solar hot water can be brilliant when you’ve got clear roof space, good orientation, and you want the lowest possible running costs (with a booster for winter/overcast days).
If you tell us your household size + current system type, we’ll recommend the best option for your goals (saving money vs lowest upfront vs fastest changeover).
What’s Included in Our Quotes (So You Can Compare Apples With Apples)
A lot of “cheap” prices online don’t include essentials.
When SA Hot Water supplies and installs a system, we quote with the important items visible, such as:
-
Safe removal of old unit (and disposal)
-
Installation labour + compliance
-
Required valves/fittings (as needed)
-
Testing, commissioning and safety checks
-
Walkthrough so you know how to run it efficiently
What Affects Hot Water Pricing in Adelaide?
Your final price depends on a few real-world factors:
-
System type (electric is cheapest to install; solar/heat pump generally higher)
-
Tank size / capacity
-
Changeover vs new install
-
Roof/ceiling installs, tight access, stairs, distance to services
-
Electrical upgrades (some systems need changes to power supply)
-
Compliance requirements / valves
-
Parts required (repairs)
As a guide, plumbing labour is commonly charged in an hourly range, and many providers also charge a call-out fee.
Rebates & Discounts (Heat Pump + Solar)
There are government incentives available for more efficient hot water systems, but they vary and can change over time.
If you’re upgrading to heat pump or solar, we’ll help you understand what’s available and how it affects your final installed price.
✅ Same-Day Repairs (Repair-First)
Best for: no hot water, leaks, tripping power, error codes, inconsistent temperature
Includes: diagnosis + upfront quote + professional repair
From $290 (final price depends on fault + parts)
✅ Same-Day Replacement (Like-for-Like Changeover)
Best for: leaking tank, failed unit, old system not worth repairing
Includes: removal of old unit + supply & install + compliance + testing
From $1890 (final price depends on brand, size, access)
✅ Efficiency Upgrade (Heat Pump / Solar)
Best for: reducing bills long-term and improving efficiency
Includes: onsite assessment + rebate guidance + supply & install + commissioning
From $4950 (final price depends on model + site requirements)
FAQs – Pricing
How much does it cost to replace a hot water system in Adelaide?
It depends on the system type, size and access. Electric is typically the lowest installed cost, while solar and heat pumps generally cost more upfront but can reduce running costs.
What’s the cheapest hot water system to install?
Electric storage is usually the cheapest to install.
How much does solar hot water cost installed?
.
How much does a heat pump hot water system cost?
Heat pump unit costs are commonly in the $2,500–$5,500 range, with installed totals depending on site and any electrical/plumbing work needed.
Why don’t you list exact prices?
Because hot water pricing depends on system size, access, compliance requirements and whether it’s a repair or replacement. We provide fast, honest quotes so you know the exact cost before any work starts – no surprises.
Want an Exact Price? Get a Fast Quote
The fastest way to get the right number is a quick assessment of:
-
your current system type + size
-
household size / bathrooms
-
access (ground / roof / tight install space)
Same-day repairs • Replacements • Heat pump & solar upgrades
📞 Call (08) 8444 7320 now for a free quote