Rinnai-Infinity-32-Enviro-7-Star-Continuous-Flow-hot-water-system

Rinnai INFINITY 32 Enviro

Rinnai INFINITY 32 Enviro Gas Hot Water System.

Rinnai revolutionised the Australian water heating market in the early 90′s when it launched the first fully electronic gas Continuous Flow hot water system in Adelaide.

Appropriately named the Rinnai INFINITY because it never ran out of hot water, today systems are even more sophisticated ‘ designed with the environment in mind with low emission burners, high efficiencies and low flow rates compatible with water saving (WELS) outlets and showers.

The Rinnai INFINITY heats water as it passes through the unit, which means you are only using energy when you turn the tap on.

Lower running costs. Lower environmental impact.

One of the most energy efficient systems on the Australian market, the Rinnai INFINITY 32 Enviro uses considerably less gas to produce the same quantity of hot water as a standard system. This highly efficient system uses heat from its exhaust to pre-heat the water before it enters the heat exchanger.

 
  • 7.0 Star equivalent* 32 litre hot water system
  • Inbuilt Energy Recovery System (Condensing Technology)
  • Uses less gas, substantially reducing running costs
  • Generates only 1/6th of the greenhouse gas emissions of a standard electric hot water system
  • Also available as a 26 Litre – 7.0 Star equivalent*
  • 12 year warranty on the heat exchanger
 

Dimensions (mm) : Height

670

Dimensions (mm) : Width

470

Dimensions (mm) : Depth

283

Colours

Titanium

Factory Default Temperature (Celsius)

60

Water Pressure (kPa) : Minimum

220

Water Pressure (kPa) : Maximum

1000

Gas Rate Min/Max (Mj/h) : NG

10/211

Flow Rate 25 Degrees C/Max : l/min

32/37

Star Rating

7.0* Equivalent

Connection Sizes Gas/Hot/Cold (mm)

20/20/20

Status Monitor

Yes

Dimensions (mm) : Height Inc Brackets

722

Dimensions (mm) : Hot Water Outlet (From Wall)

115

Dimensions (mm) : Hot Water Outlet (Left from Centre)

100

Dimensions (mm) : Cold Water Inlet (From Wall)

80

Dimensions (mm) : Cold Water Inlet (Right from Centre)

28

Dimensions (mm) : Gas Connection (From Wall)

104

Dimensions (mm) : Gas Connection (Right from Centre)

103

Dimensions (mm) : Condensate Outlet (From Wall)

138

Dimensions (mm) : Condensate Outlet (From Centre)

195

Dimensions (mm) : Gas Connection Length (From Base)

40

Dimensions (mm) : Cold Connection Length (From Base)

50

Dimensions (mm) : Condensate Connection (From Base)

22

Dimensions (mm) : Condensate Fitting Diameter

15

Weight (kg)

32

Hot Connection Length (from base)

41

Operation & Installation Manual

Parts Manual

Product Range Guide