AquaMAX-Gas-Hot-Water-System

AquaMAX Gas Hot Water System 340

AquaMAX Gas Hot Water System 340. With Five Star Gas Aquamax water heaters from SA Hot Water™ you have all your needs covered at both ends of the scale.

From Aquamax super-efficient 270 with the latest MAXI-namel cylinder, to the groundbreaking stainless steel 270, 340 and 390.

Because these units are mains pressure, they can keep up with the highest demand even when you turn on the second, third or fourth tap, the hot water flow remains constant.

The AquaMAX 340, five star energy rated water heater has all the features of the 390, with the exception of the mixing valve.

Specifically designed for installation in new homes, where an approved tempering valve must be fitted by law to guard against scalding. Your plumber will fit an approved tempering valve on the hot water line, restricting water to a maximum of 50ºC (in this type of installation, the mixing valve is of no additional benefit).

Or you can also add our multi-fit Tempering Valve Kit to the AquaMAX 340, and vary the hot water temperature at each point in your home. Water can then be supplied for example, at 65ºC in the kitchen and laundry, with bathroom and ensuite outlets receiving 50ºC or lower.

 
51

 

Specifications 340 SS (witout mix)
Cat. No. G340SS
Gas type Natural
Tank Capacity 155 Litres
Nominal gas consumption 40 MJ/Hr
AGA Star Rating Index 5 Stars
Recovery rate at 45°C rise 185 Litres/Hr1
Installation type External only
Pressure & Temperature Relief Valve setting 1400 kPa/99°C
Max. water supply pressure 1100 kPa
Tank material stainless steel
Water inlet connection Rp ¾” (20mm) Female
Water outlet connection Rp ½” (15mm) Female
Gas connection ½” flared compression
Warranty (Cylinder) 10 years
WaterMark Licence No. WMKA00200
Overall height 1635mm
Width (approx.) 520mm
Depth (approx.) 610mm
AGA Approval No. 6114
Weight empty (approx.) 65 kg
Number of people 2-5

 

 
51